Follow us: 

Audio Exciters

The tables below detail the family of audio panel exciters available from Tectonic Elements. A full range of exciter components provide a variety of output power and form factor options, depending on the needs of the application. Tectonic Element’s exciters are used in a wide variety of applications and products. If you would like assistance in selecting which exciter may be able to meet your requirements, please use the product selection guide below.

If an exciter specification is required but not detailed here, please contact your local Sales Representative for more information.

Classic audio exciters

This family provides the most optimised solutions for a wide variety of applications.

Part No. Continuous Power Rating Nominal Impedance Maximum Outside Diameter (mm) Thickness (mm) Mass (g) Datasheet Buy From RS
TEAX13C02-8/RH 1W 8 ohm 32.2 9 10 Download Buy
TEAX19C01-8 2W 8 ohm 41 12.9 29.6 Download Buy
TEAX25C05-8 5W 8 ohm 52 14.5 60 Download Buy
TEAX25C10-8/HS 10W 8 ohm 61.3 19 85 Download Buy

Soundpax

This exciter family can be securely mounted to vertical surfaces in a robust, reliable manner. The polypropylene enclosure has three flexible legs with double-sided foam adhesive pads allowing the whole exciter assembly to be mounted onto the panel.

Part No. Continuous Power Rating Nominal Impedance Maximum Outside Diameter (mm) Thickness (mm) Mass (g) Datasheet Buy From RS
TEAX25C10-8/SP* 10W 8 ohm 113 22.8 95 Download Buy

Low profile exciters

The low profile exciter is designed to produce good quality sound in products which require very thin form-factors.

Part No. Continuous Power Rating Nominal Impedance Maximum Outside Diameter (mm) Thickness (mm) Mass (g) Datasheet Buy From RS
TEAX19C01-4/LP 1W 4 ohm 30 6.3 14.1 Download Buy

Special use exciters

Designed for special applications, this exciter range provides differentiated products for a number of market uses. The range spans from small form-factor to high power exciters.

Part No. Notes Continuous Power Rating Nominal Impedance Maximum Outside Diameter (mm) Thickness (mm) Mass (g) Datasheet Buy From RS
TEAX09C005-8 Very small form factor exciter 0.5W 8 ohm 26 6.5 3.2 Download Contact Us
TEAX14C02-8 Small form factor exciter 0.8W 8 ohm 37 9.85 12.8 Download Buy
TEAX32C20-8 Specifically designed to drive dense rigid surfaces,  this exciter is self supported 10W 8 ohm 52 22.5 150 Download Buy
TEAX32C30-4/B Robust exciter resistant to harsher environments (e.g. dust, vibration and shock) 30W 4 ohm 53 19.6 130 Download Buy

* Only the Soundpax exciter is supplied with leads already attached.

Please note: You should check that your intended application of this Tectonic Elements product does not infringe the patent (or other intellectual property) of any third party.  Tectonic Elements does not give any warranty in this regard.